|Your task for this two-week project is to design and print something epically unmanufacturable. There are only a few constraints:
1. The product must be mounted to a 5.5" x 5.5" wooden base (to be provided), into which you will need to engrave your name and any other details that you deem appropriate.
2. The product must be finished beyond the 3-d printed form.
3. The total "cost" for printing your part(s), as defined below must be less than $30
cost = ($5/in^3) * model + ($5/in^3) * support + ($1/hour) * print_time
where model and support are both in cubic inches, and print_time is in hours
|Jan 13, 4:30 p.m.||The project begins.|
|Jan 20, 4:30 p.m.|
|Send a high-resolution (1400x1050 px) JPG rendering of your object to firstname.lastname@example.org.|
|Jan 27, 4:30 p.m.|
|Turn in the finished product for public display and critique.|